Used with Zing It for tarp tie outs and works great.
Thanks Pete! A really handy piece of hardware, indeed. Let us know if you need anything.
These work great. I used them as adjusters for the secondary suspension on a DIY underquilt with 1/16 shock cord. The secondary keeps the UQ from bunching up once the primary suspension (1/8" shock cord) is set. It should be intuitive for most folks how to thread the cord through them, but I'm a little slower :) and had to look up an image on the web how to thread the cord through them. I would give them five stars if they included a small 'how to thread' image in the package.
Used with 1.8mm line The locks will slip if the tension is too high. Not a big deal i just threw a slippery half hitch into the line where it meets the lock to secure it down. I would say use larger then 2mm lines if you plan on using these.
Thanks for the feedback here. We tested these again with 1.8 mm cordage and did find that under high load there is a chance for slippage. We've updated our suggested cordage diameter on the product page just now.
We'll also follow-up through email. Thanks again!
The specs say its for 1.5mm-2.5mm but it slips on 1/16"(1.6mm) shock cord if the cord is slackened or if the tensionlock is bumped. I got this to use for a secondary suspension on an underquilt and I have to reset them each time I hang the quilt. They would probably work ok on larger cord but 1/16" is too small for this device.