Your Cart is Empty
$73.25
$73.25
NOTE - All Omnicolor Solids fabric is digitally printed, which means that the color won't show through to the back side for thicker fabrics. Before ordering, be sure to check out our article on ink penetration for different fabrics/materials HERE.
To use this product, you must first own an OutdoorINK Color Map. Buy yourself a map, find the color(s) you want, then select the corresponding color codes above.
Check out our Online Interactive Color Map .
Dyneema® Composite and Woven Dyneema® might be the uber fabrics for ultralight or ultra-tough gear, but when it comes to colors, you don't have a lot of options. That is until now.
Introducing Omnicolor for Fabrics with Dyneema® - the first ever print on-demand capability that allows you to source technical Dyneema materials in virtually ANY color.
It works like this. Simply select your Fabric, Size, and Color code above. Our team will then digitally print your custom color Fabric with Dyneema® and ship it to your door in just a few days.
But what about quality? How do printed Dyneema® colors compare to stock?
Thanks to our proprietary in-house OutdoorINK process, printed colors are made rich, deep, and vibrant - equal to or better than traditional stock colors.
There's a revolution brewing. Whether you're a DIYer or vendor making finished products, it's time to change the color game using printed fabrics with Dyneema®.
IMPORTANT- All printed Woven Melange with Dyneema will have a "heathered" effect due to the mix of polyester and Dyneema fibers. A given solid color printed on these materials will appear lighter in overall shade.
Dyneema® is a trademark of Avient. Use of these trademarks requires approval from Avient.
We currently offer Omnicolor printing on the following fabrics with Dyneema:
1.0 oz DCF (CT2K.18)
1.43 oz DCF (CT5K.18)
2.92 oz DCF Hybrid ( CT5K.18/wov.32c)
5.0 oz DCF Hybrid ( CT5K.18/wov.32c)
The digital print process works best on any "K" variants of DCF containing thicker mylar layers OR hybrid fabrics with a woven polyester face.
6.5 oz Woven Melange with Dyneema - PU1000/DWR (DDRWX090)
6.5 oz Woven Melange with Dyneema - Breathable/DWR (DDRWX090)
Omnicolor printing on fabrics with Dyneema® is offered in two sizes:
Due to the unique nature of the print process for fabrics with Dyneema®, all prints are done non-continuously.
This is an active choice by us to ensure that all printed Dyneema consistently meets the highest levels of quality that we demand for both performance and color.
Size options shown indicate the pre-printed usable area of Dyneema that you will receive. Due to manufacturing, some minor shrinkage (typically less than 2%) may occur in the final printed usable area.
We do not currently offer samples of Omnicolor printed fabrics/materials. However, most printed colors on fabrics with Dyneema® are close in shade to colors printed on similar weight polyester fabrics.
The best way to sample Omnicolor fabrics is by purchasing an OutdoorINK Color Map for the fabric(s) you're intending to buy.
This map is an actual linear yard of fabric with 1260 printed swatches solid color swatches. Buying each map allows you to see exactly what each color will look like when printed on a given fabric.
Keep in mind that many Dyneema® Composite Fabrics are semi-translucent. This combined with a non-woven, laminate construction can affect color shade.
In general, light to mid tones are very accurate to the same colors printed on woven polyester. Darker tones tend to show up slightly lighter on DCF than on a similar weight polyester.
