$2.50
$2.50
WHOLESALE - Looking to buy larger amounts at 25-40% savings? Click HERE for full roll sales.
Stitched seams are good, but taped seams are better.
Compared to stitching alone, using a quality seam sealing tape makes your finished product stronger (i.e. it lasts longer) and also more waterproof.
For some laminated fabrics, it's a must-have to prevent issues like stitch elongation.
This PET Seam Seal Tape from Dimension-Polyant is a 1" strip of polyester film with a pressure-sensitive adhesive (PSA) on one side. You can apply it by hand and it cures within a couple of hours at room temperature.
You spent a lot of time planning and building your project. Finish it properly by seam taping.
Note - This seam seal tape will work with all of our tapeable fabrics ( X series X-pac, ECOPAK EPLX, Challenge Ultra, Dyneema Composite Fabric, Venom, etc).
Keep in mind, although this tape does add some seam strength, it is not a "repair tape" to be used for fixing small holes or tears. For that, we recommend using DCF Repair Tape instead.
Sold in 1 yd sections. Please note that all sections are pre-cut and cannot be sent continuous. For example, buying a qty of "2" will result in two separate 1 yd sections. If you need longer pieces, it's perfectly fine to join multiple 1 yd sections together when taping your seams.
Product Details | |
Color | Clear/transparent |
Film Thickness | 1 mil |
Width | 25 mm (~1") |
Weight | ~1.9 grams/foot |
Finish/Coating | N/A |
(1) Actual material properties will vary. Values listed represent average values or estimates.
(2) Disclaimer - All information, data, recommendations, etc provided for Ripstop by the Roll products (the Information) is produced for reference only. Ripstop by the Roll assumes no liability arising from (i) the application, processing, or use made of the Information or products; (ii) infringement of the intellectual or industrial property rights of third parties by reason of the application, processing, or use of the Information or products by the Buyer. Buyer shall (i) assume such liability; and (ii) verify the information and the products.