$21.00 /half yd
$21.00 /half yd
Sold Out
NOTE - All cut yardage of Dyneema® Composite Fabric is sold by the half yard. For example, enter a quantity of "6" for a cut of 3 yards.
WHOLESALE - Looking to buy larger amounts with a discount? Click HERE for full roll sales.
0.67 oz/yd 2 Dyneema® Composite Fabric (formerly Cuben Fiber). This is the same base material as the 0.51 oz/yd 2 Dyneema® Composite Fabric, but with an added camo print laminate.
DCF is a patented, ultra-lightweight fabric made of flexible non-woven composite laminates which are reinforced with Dyneema® fibers.
This fabric is costly and for good reason - it's 15x stronger than steel and provides the highest tear and tensile strength of any competing fabric on a weight-by-weight and thickness basis. Use only for projects that demand high-performance and the absolute best in ultra-lightweight, waterproof fabric.
The 0.67 oz/yd 2 variant of DCF is best for ultralight tarps, tents, flys, and light duty stuff sacks.
Sold by the Half Yard. For example, enter a quantity of "4" to receive two linear yards of material, measuring two yards (72") in length by the listed width of the material (check specs tab).
NOTE - As a product of the print manufacturing process, there could be a tiny strip of unprinted DCF running across the width of the material for any given order length. Please understand that these are not material flaws. Thanks!
Dyneema® is a trademark of Avient Corp. Use of these trademarks requires approval from Avient.
Product Details | |
Colors | Camo |
DSM Product ID | CT1E.08/C21K.18 |
Width | 54'' (137.2 cm) |
Weight | 0.67 oz/yd 2 (22.7 gsm) |
Finish/Coating | 100% Waterproof |
(1) Actual material properties will vary. Values listed represent average values or estimates.
(2) Disclaimer - All information, data, recommendations, etc provided for Ripstop by the Roll products (the Information) is produced for reference only. Ripstop by the Roll assumes no liability arising from (i) the application, processing, or use made of the Information or products; (ii) infringement of the intellectual or industrial property rights of third parties by reason of the application, processing, or use of the Information or products by the Buyer. Buyer shall (i) assume such liability; and (ii) verify the information and the products.