Customer Project: Pack bag

A lightweight pack bag to mount on an existing frame for long approaches with ice gear.
I don't have any dedicated sewing equipment, so this was sewn entirely by hand with needle and thread. I used lots of masking tape and paper to lay out the pattern. Sewing was done with straightforward backstitch technique and bar tacking. Went surprisingly well for a first sewing project. About two weeks total with less then an hour a day.
Required Materials:

I used 420 and 210 denier Robic ripstop, 1" nylon webbing and grosgrain, and Tera 80 thread.
Related Products: