Steps are outlined in the You Tube video.
1. Cut 6” x 12” pieces of HEX70 PU3000 and 3.4 oz pocket mesh.
2. Cut 4 pieces of 3/8” grosgrain 5.25” long
3. Cut 1 piece of 3/8” grosgrain 3” long
4. Cut 1 piece of 1/2” nylon webbing 6” long
5. Measure down 4” and 8” and mark for 1st buckle and 2nd buckle strap.
6. To round the bottom go down 9.5” and mark then from the bottom center go over 1.5” and mark. Draw a curve line to the points. Fold in half to get the other side of the curve.
7. Face HEX70 fabric right side up, place grosgrain with buckles at the marks (4” , 8”), place pocket mesh on top and sew around. At the bottom center insert the 3” folded in half for a pull tab.
8. Turn the holder inside out
9. Sew a roll hem around the top.
10. Sew the 1/2 webbing 1.5” down the center of HEX70 fabric
11. Put buckle and glide slide to the webbing.
