1.0 oz ROBIC XL ripstop nylon

Ripstop by the Roll

$7.95 /yd
Dark Olive
Burnt Orange
Charcoal Gray
Coyote Brown
Deep Purple
Olive Drab
Hunter Green
Racing Red
Robin Egg Blue
Spectra Yellow
Vader Blue
How to send
Which should I pick and why?
No order minimum. Choose this option to send fabric cut and folded (like a blanket).

Remember when ULTRALIGHT meant delicate and fragile? Meet 1.0 oz ROBIC® XL. Compared to similar weight standard nylon fabrics, 1.0 oz ROBIC® XL is both stronger and more durable.

The difference starts with the yarn. See below for a typical comparison between fabrics using standard Nylon 6 yarn and ROBIC® yarn:

ROBIC vs Nylon 6

Translation? ROBIC® fabrics are up to 50% stronger with 2.5x the tear strength. In other words, it's hard to break and tough to rip.   

To reduce bias stretch and increase abrasion resistance, 1.0 oz ROBIC® XL also uses a diamond hybrid ripstop grid. This makes it easier to sew, increases comfort for load bearing applications (e.g. hammocks), and extends the overall life of the fabric. 

Like the other fabrics in our XL line, we've custom woven 1.0 oz ROBIC® XL to be WIDER than standard fabrics at 68" versus the more common 60" width

1.0 oz ROBIC® XL is great for widebody hammocks, synthetic quilt shells, chairs, lightweight bags, or any application where lightweight, strong, and highly durable fabric is needed. 


Product Details
Colors Black (N/A), Burnt Orange (16-1448), Charcoal Gray (18-0601), Coyote Brown (N/A), Dark Olive (19-0516), Deep Purple (N/A), Hunter Green (19-5511), Olive Drab (18-0622), Racing Red (19-1763), Robin Egg Blue (3248), Spectra Yellow (14-0957), Vader Blue (N/A)
Width 68'' (including selvedge)
Weight  1.0 oz/yd2
Denier 20D
Yarn ROBIC® nylon 6
Ripstop Grid diamond hybrid (diamond with box)
Finish/coating Breathable with DWR, uncalendered

Ordering/shipping info

Order Change/Combination Policy

To maintain fast and efficient fulfillment, please note that no order changes/combinations are permitted after order placement (except address changes). Please see FAQ page for full details. 

Continuous Cut Policy

Please see below for our continuous cut policy. Note this policy applies to each separate product on the order:

Fabrics - < 20 yds guaranteed continuous

OutdoorINK® prints - < 10 yds guaranteed continuous

Insulation - < 5 yds guaranteed continuous

Zipper - < 25 ft guaranteed continuous

We always attempt to give a continuous-cut if possible, but splices are present in various materials due to the manufacturing process. Unless otherwise notified, all orders will be cut per the above policy.

IMPORTANT: If you are ordering larger amounts and have specific cut requirements, we can make cuts that work for you, but you MUST list these reqts in the notes section of the order. These notes can be added on the cart page. 

Also please note that as a general policy, we DO NOT offer custom cuts (e.g. 40 yd order cut into 4x10 yd lengths).

Please see our FAQ page for full details.

Shipping Availability USA and International 
Shipping Method/Rates

USPS Priority Mail or First-Class - Tracked and Insured. Select larger orders shipped via USPS Parcel Select or UPS ground.

Domestic (USA) flat-rate shipping
Fabric/components - $6.95
Orders containing insulation/3D mesh - $11.50*
*select destinations add $5 - CA, MT, CO, NM, AZ, UT, NV, OR, WA, CA, ID, WY, AK, HI

*Note: certain bulk orders may be subject to additional shipping charges. Please see our FAQ page for further details.

International shipping
Fabric/components - Cost based on weight/size. See shipping calculator on cart page once ready to order.
Orders containing insulation/3D mesh - Due to bulk, exact shipping costs will be billed separately AFTER your order is submitted. Once your order is packed and ready, you will be sent an electronic invoice to pay for shipping costs via credit card or Paypal. Note that your order will be held until payment is received for shipping.

Please keep in mind that international shipping for insulation/3D mesh can be costly given the size of the items. Be aware that once we cut your order, any cancellation would be subject to our standard 15% restocking fee. Thanks in advance for your understanding.

International shipping of insulation/3D mesh is currently a trial program and limited to Canada and Australia ONLY. We have no timeline for adding additional countries. As an alternative for our customers in other countries, please consider the forwarding service Shipitto.

Estimated Delivery Date In-stock orders typically ship within 24 hours. OutdoorINK® print on-demand fabrics typically ship within 3-5 days of order placement. For the most up to date shipping times, please check our update page HERE.


ripstop samplesSAMPLES - Trouble deciding or want to see the fabric first hand? Head over to our samples page to order a custom sample pack.

1.0 oz ROBIC XL ripstop nylon has a rating of 5.0 stars based on 55 reviews.